www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to review part number T101-103 from Kuat. This is our trail doc bike repair stand. This repair stand is designed to adapt to a fine quality Thule bicycle rack. In this case it will only fit the Thule T2 bicycle rack. We will start an assembly of this. All we are going to do is pop off this cap right here. Next we are going to install the base of the repair stand and this existing hole, the threaded part, will meet up with this hole. What also is a nice note if you look on the back side of this plate. See how it has got a ridge, that actually matches the inside diameter of the tube itself so it helps to keep it from rotating. Lets put it into place and you can see how that keeps it from moving. Then we will install our bolt, flat washer, and lock washer and tighten it down. The base is already installed. Now lets do the second half. Make sure that this clamp right here is opened up and the other part just simply slides into place. 01:07 Now you want to leave it in this position right here for transport and hauling your bikes around. To lock it into place you take this clamp right here and pull it back tight and it is not going anywhere at all. To use it as an actual repair stand, unclamp, raise it to the setting you want and rotate it the way you want it, then clamp it back down. Then with the clamp up here you can ...
Lowest Price Monogrammed Diaper Bags
No comments:
Post a Comment